Man in a cap and safety glasses shining a flashlight into an air handler drain pan holding standing water, white drain pipes and a stained wall beside it

Tempe guide · 4 min read

Mold Remediation Quote Checklist

A mold remediation quote usually names the water source, materials, containment and clearance.

A remediation quote is a price attached to a scope. These are the items a written remediation quote for a Tempe home usually lists.

A mold remediation quote in Tempe usually answers four questions: where the water is coming from, what material comes out and how much, how the work area is contained, and who confirms the space is clean at the end, which is a testing question. A quote that says "treat affected area" is a number without a scope.

Each item below is a line a written quote usually lists.

01 / Good to know

The checklist

1. The water source, named. Not "moisture issue." A specific source: the bathroom fan terminating in the attic, the condensate line, the supply line under the sink, the roof flashing at the patio cover. If the source is unknown, the quote usually includes finding it.

2. The extent, in materials and measurements. Square feet of drywall, linear feet of baseboard, number of cabinet bases, whether insulation comes out. "Affected area" is not a measurement.

3. The containment method. Plastic sheeting and a zipper door, or a hard containment. Which rooms are inside the barrier and which stay usable.

4. Negative air. Whether an air scrubber runs, for how long, and where the exhaust goes. This is what keeps the rest of the house out of the dust path.

5. Clean versus remove, per material. Hard surfaces can be cleaned. Drywall, insulation, ceiling tile, carpet and cabinet board usually come out. A quote usually says which is which.

6. Contents. Furniture moved or covered, and what happens to items that cannot be cleaned.

7. Drying equipment and the dryness test. Air movers and a dehumidifier, and the meter readings that confirm the assembly is dry before it is closed.

8. Clearance. Who performs it, when, and against what criteria. The clearance testing guide explains how clearance is set up.

9. Exclusions. Drywall replacement, tape, texture, paint, trim, flooring and permits are commonly excluded. They are not necessarily missing, just priced elsewhere.

10. Waste disposal. Bagged material, haul-away and disposal fees.

11. Price structure. A total, a unit price for each material, and a written change-order process for what is found after the wall opens.

12. Schedule and access. When the work starts, how long each stage takes, and what the work needs from the household: parking, power, water, pets out of the way.

13. Payment schedule. How much is due at signing, at containment, at removal and at clearance.

Dark air scrubber with a black duct hose running into plastic sheeting taped in a hallway of a tile-floored house

02 / Good to know

What a specific line looks like

ItemA specific line reads
Water source"Bathroom exhaust duct terminates in attic, wet sheathing above hall bath"
Extent"Remove the hall bath ceiling drywall and insulation"
Containment"Plastic and zipper door, negative air, hallway outside barrier"
Clearance"Visual plus 2 air samples before drywall"

Specific lines show what the price pays for.

03 / Local facts

What the numbers should look like

These are national ranges, not quotes for a Tempe address.

ScopeNational rangeSource
Remediation, typical$1,500 to $9,000, average about $3,500One national cost guide
Per square foot$10 to $30One national cost guide
Small bathroom$500 to $1,500One national cost guide
Attic$1,500 to $9,000One national cost guide
Walls$1,000 to $12,000One national cost guide
Ceilings$1,000 to $9,000One national cost guide
HVAC system$3,000 to $10,000National cost guides
Mold removal from air ducts$600 to $2,000Another national cost guide

Gaps from the range usually trace to what the scope includes, such as plaster, cabinet removal, contents handling or reconstruction.

04 / Good to know

The license question in Arizona

The Arizona contractor license page explains when a contractor license is required in Arizona.

05 / Good to know

What the quote file holds

A quote file usually holds the scope, the change orders and the photos. If the job grows after the wall opens, a change order describes what was found and what it costs. If clearance fails, the report and the remedy are added to the same file.

That file is also what a landlord, a buyer or an insurer will ask for later. The mold removal cost page covers how the numbers break down by room, and the remediation timeline shows which stage each line item belongs to.

Worker in a white suit and respirator carrying a black debris bag across a plastic-covered floor, an opened lower wall and a stepladder behind

07 / 2 questions

Frequently asked questions

Still have a question?

Send the form. Someone from our team will call you back soon.

Get a call back

Q.01

Does a mold remediation quote include the repair work?

Usually not. Remediation ends at clean, dry structural surfaces. Drywall, texture, paint and trim are reconstruction, and they are commonly excluded.

Q.02

What if the quote does not name the water source?

A scope without a named source leaves open where the water comes from, and growth can return if the water keeps arriving. If the source is unknown, the quote usually includes an inspection to find it.

White cargo van with its rear doors open in a driveway, a man in navy work clothes wheeling a teal air machine out in front of a ranch house

Form open 24/7

Get a call back about mold in your home

Send the form. Someone from our team will call you back soon.

Mold in the house?Get a call back

Before you go: want a call back?

Send the request form and someone will call you back about the mold.

Get a call back

Get a call back

Send the form and someone from our team will call you back.